Posts Tagged ‘Troutdale’

« Older Entries
Newer Entries »

Preventative Maintenance For Your Home Heating System

Monday, February 6th, 2012

Ben Franklin once said, “An ounce of prevention is worth a pound of cure.” His famous quotation can apply to many things in life, including the heating system in your home. While heating systems in Ben Franklin’s time consisted of wood burning stove and fireplaces requiring little maintenance, today’s sophisticated furnaces and building controls require a good dose of preventative maintenance in order to avoid mechanical failures and inefficient operation.

For example, a furnace runs better and lasts longer when you maintain a regular schedule of filter cleaning or replacing. A dirty or clogged filter can restrict airflow from the furnace into your home’s ventilation system and cause the furnace to work harder, putting more wear and tear on it and taking months, if not years, off of its useful life. If your furnace uses disposable filters, check them every month and replace them if necessary. If your furnace uses an electronic filter that requires cleaning, check it on a monthly or semi-monthly basis and clean it with soapy water and a hose. Be aware of the change of seasons which could add extra pollutants into the air like pollens, ragweed, and cottonwood. This debris easily finds its way into the filters and creates an unhealthy indoor environment.

You can also perform a simple visual inspection of working components inside your furnace by removing the access cover and checking – with a flashlight – for loose fan belts, frayed electrical wires, or a build-up of dirt and dust. Simple solutions include tightening or replacing belts, repairing wiring, and vacuuming out dirt and dust with a hose attachment. All of these actions will keep your furnace working better and prevent future failures.

You can also do a visual check of your home’s ventilation system, paying close attention to any cracks in duct seams or holes in flex ductwork. Using sealing cement or duct tape can usually fix these problems and allow for better, unrestricted air flow. Again, these actions will help your furnace work more efficiently and avoid premature failures.

Maybe the best advice for preventing heating system breakdowns is to have a regular maintenance schedule with a local qualified heating contractor. Most contractors can set you up with annual furnace and ventilation system inspections. Having a service agreement – as a rule – gives you priority emergency repairs and discounts on parts and services. Besides that, planned maintenance is also preventative maintenance, something that will give you peace of mind in the long run.  Please contact your HVAC experts at Clean Air Act if you have any questions about these preventative maintenance ideas.

Tags: , ,
Posted in Services | Comments Off on Preventative Maintenance For Your Home Heating System

How to Fix a Faulty Furnace Blower

Monday, December 5th, 2011

The blower fan on your furnace is designed to distribute warm air through the ductwork in your Troutdale home evenly, ensuring you use all of the energy consumed by your furnace. If the blower doesn’t turn on when the furnace turns on or it continues to run when the furnace is off, it can cost you money and result in cold rooms. Here are some tips on how to fix a faulty furnace blower.

What is the Problem?

First, check to see what the problem is. If your furnace blower remains on all of the time, it may be a thermostat issue. Make sure the fan isn’t set to stay on continuously (a common setting for most air handlers). You should also check the limit control switch to make sure it is working properly. If this is broken, it needs to be replaced which is a relatively simple fix.

If the furnace blower isn’t turning on at all, you may have a belt problem. This can be fixed by you if you have the proper tools. To repair the belt problem, first turn off all electricity to the device. You’ll need to remove the old furnace blower belt, so release the tension in the pulleys before removing the belt.

Installing a new belt is not unlike doing so for your car. Make sure to check the blower or your user manual for proper tension when you install the new belt. Make sure you purchase the right size belt and set it to the right tension. If you cannot or you do not feel comfortable doing so, you should call a professional to inspect and repair the problem for you.

Getting the Blower Back Up and Running

Once your new belt is in place, test the system carefully, starting with the lowest setting (if there are variable settings). If it does not yet work or if something sounds strange, call a technician right away. You don’t want the motor to burn out or something else more substantial to go wrong with your furnace or air handler during the middle of the winter.

Tags: , , , , ,
Posted in Services | Comments Off on How to Fix a Faulty Furnace Blower

What Is Geothermal Heating?

Wednesday, November 16th, 2011

Having a geothermal heating system installed in your Hubbard home means that you will actually be able to heat your home with heat extracted from the ground. If this sounds a bit preposterous to you, you are certainly not alone. But this type of home heating does actually work and the technology is not actually that much different from what is used in a standard heat pump system.

Regular heat pumps are able to remove heat from the outdoor air and transfer it into your house to maintain a comfortable temperature in the winter. You may think that there is no heat in the outdoor air in the winter, but that is not actually the case.

Air contains a substantial amount of heat even at very cold temperatures, and heat pumps are able to work quite well, particularly when the outdoor temperature is above freezing. Conveniently, the same process used to heat your house in the winter can be reversed in the summer to extract heat from the indoor air, providing you with a year round home comfort solution.

Geothermal heating works in much the same way, except that geothermal heat pumps extract heat from the ground rather than the air. In order to accomplish this, a loop of pipes is installed in the ground near your house and your geothermal heating system will pump a liquid, generally either antifreeze or water, through those pipes.

As it passes through the pipes, the liquid will absorb heat from the ground and carry it back to a heat exchanger within your house. At that point, the heat from the liquid will be released into air, which is then blown throughout your house.

And just as conventional heat pumps can cool your house in the summer by removing heat and pumping it outside, so too can geothermal heating systems. They do this simply by letting the liquid flowing through the pipes absorb the heat from inside air and then release it into the ground as it travels through the pipe loop below your house.

Because the ground is never as cold in the winter or as hot in the summer as the air, geothermal heat pumps are actually able to work effectively in more extreme conditions than many traditional heat pumps. However, because they require an entire system of pipes to be installed underground, they can be quite a bit more expensive initially as well.

Tags: , , , , ,
Posted in Services | Comments Off on What Is Geothermal Heating?

Turn that Thermostat Down a Degree and Save Money

Monday, September 26th, 2011

There are literally dozens of things you can do to cut back on your heating (and cooling) costs in Troutdale. These range from things like getting a high energy efficiency system to just making sure that you have adequate insulation in all parts of your house. But too many people overlook one of the simplest things that you can do to cut down on your monthly heating bill, and that is to turn the thermostat down.

Of course, you did not pay for that high tech home comfort system just so that you could walk around cold all winter long. You certainly want to keep your house at a temperature that is comfortable, but what does that really mean?

The normal default setting for a home heating system is usually somewhere between 72°F and 75°F. If you have your thermostat set somewhere in this range in the winter, you are probably quite comfortable indoors. In fact, you might not even need a sweater. But would you really notice if it was a degree or two cooler? Would it be incredibly inconvenient to put on a sweater or sweatshirt after all?

The truth is that most of us will be just as comfortable at 69°F as we are at 72°F, and the effect that small adjustment can have on your heating bill is actually pretty significant. In fact, you will save an average of 3% on your monthly bill for every degree you turn your thermostat down. Drop the temperature down by three or four degrees and that will give you up to a 10% monthly savings – hardly something to turn up your nose at.

And setting the regular temperature in your house a bit lower is not the only way your thermostat settings can save you money. You will also save quite a bit if you take the time to turn down the temperature when you leave the house and when you go to bed at night. There simply is no reason to pay to heat your house when you are not there and you will certainly be rewarded with a lower energy bill for your efforts.

Tags: , , , , ,
Posted in Services | Comments Off on Turn that Thermostat Down a Degree and Save Money

The Effect of Dust Mites on Indoor Air Quality

Wednesday, September 21st, 2011

There are three types of indoor air pollutants in your Oregon City home  – particles, bioaerosols and gases. Dust mites are a special case because they are nearly invisible to the eye, but represent a substantial bioaerosol that can make it harder to breathe and result in a number of sometimes debilitating symptoms.

What Are Dust Mites?

Dust mites are tiny arachnids related to ticks and spiders that cling to fabric like curtains, carpet and upholstery. They resemble dust in the air and thrive in high humidity conditions. So, the easiest way to treat a dust mite problem is with proper dehumidification. Knowing whether dust mites are a real problem if you simply have a lot of dust and pollen floating around is tough. Here are some common symptoms to look for:

  • Dizziness
  • Nose Irritation
  • Respiratory Irritation
  • Cough
  • Chest Tightness
  • Asthma (made worse)
  • Allergic Reactions

Because dust mites are alive when you breathe them in, they can cause severe irritation to your throat and lungs and result in a number of uncomfortable reactions – ranging from a runny nose to a full blown allergic reaction.

Getting Rid of Dust Mites

So, how do you get rid of these tiny arachnids? The first step is to improve the humidity level in your home. Anything under 50% humidity makes it impossible for dust mites to survive, so air conditioning in the summer and dehumidification in the spring and fall are the best steps to remove the threat of these little bugs.

Tiny dust mites are among the larger air pollutants and can be captured by most MERV 10+ filters on the market. A HEPA filter will absolutely remove them as well, along with any other particulate or bioaerosols in your home. You might also consider an air cleaner.

Tags: , , , ,
Posted in Services | Comments Off on The Effect of Dust Mites on Indoor Air Quality

Steps to Take When Your HVAC System Breaks Down

Friday, September 2nd, 2011

Imagine this – it’s a sweltering summer day in Troutdale. The humidity outside is obscene, hitting you like a wall when you open the door. So, the only place you want to be is on the couch with the cool air conditioned air being blown across your face. Sounds pretty good doesn’t it? Now, imagine what happens when that cool conditioned air stops flowing.

A breakdown in your HVAC system is the absolute last thing you want to experience on a day where the mercury dings 90+ but it can happen, and the only way to ensure things don’t get out of hand is to take the following steps.

  1. Check Common Problems –While the system itself could be broken, make sure there are no other issues involved. Frequently, the electricity supply can be interrupted by a power surge or a tripped breaker. In both cases, you can usually get the system back online by yourself. However, you should call an electrician to inspect it as soon as possible.
  2. Does it Turn On – If the air conditioning system turns on and simply doesn’t provide enough cooling for your home, it is likely a problem in the unit. In this case, check other common problems. Clogged filters can severely reduce efficiency and if the system freezes over, it may stop providing enough cooling.
  3. Still Not Working? – If the system refuses to turn on and there are not clear problems that you can fix yourself, it’s time to call a professional. A professional HVAC contractor should be available almost any day of the week for emergency calls like this. Of course, in the middle of a heat wave or cold snap, it’s very likely that they may be booked up for a couple days. To avoid this happening, have routine maintenance done as often as recommended to avoid the possibility of being without cooling or heating indefinitely.

A good HVAC system is the only thing standing between you and discomfort, or worse, danger to your health. Don’t let the system go into such disrepair that you can’t use it at all.

Tags: , , ,
Posted in Services | Comments Off on Steps to Take When Your HVAC System Breaks Down

Who Invented Air Conditioning?

Friday, August 26th, 2011

For hundreds of years, people have been trying to figure out how to stay cool in the heat of the summer. But it wasn’t until 1902 that the first modern air conditioner was put into service in Brooklyn, NY. Since then, many adjustments and improvements have been made to make air conditioning available and convenient for people to use in their Troutdale homes and cars. But through it all, the basic principles used in that first air conditioner have remained constant.

The Sackett-Wilhelms Lithographing and Publishing Company

The heat and humidity in New York in the summer isn’t something to be taken lightly, but it posed particular problems for the owner of the Sackett-Wilhelms Lithographing and Publishing Company. The conditions inside his facility were such that the paper used was warping and the dimensions fluctuating, causing the printing to constantly come out misaligned.

To try and solve this problem, he hired the Buffalo Forge Company, which itself had just hired Willis Haviland Carrier, a recent recipient of a Master’s Degree in Engineering from Cornell University. Carrier approached this problem by trying to find a way to cool air by passing it over cold coils in the same way air was heated in those days by passing it over hot coils.

As it turned out, this process worked to reduce both the temperature and the humidity in the area and Carrier’s first air conditioner began running at Sackett-Wilhelms in July of 1902.

The Next Steps

As the potential for this new technology became more and more apparent, demand for Carrier’s device grew in all sectors of the economy. Employers were delighted by the way air conditioners increased the productivity of their workers during the hottest months of the year, and in order to keep up with demand, Carrier eventually founded the Carrier Air Conditioning Company which still exists today.

The coolants used in the earliest air conditioners were generally either highly flammable or toxic, and often both. In order to make air conditioning safer and easier to use, a safer coolant needed to be introduced, which was what drove Thomas Midgley, Jr. to develop Freon in 1928. Freon was initially made up of chlorofluorocarbons (CFCs), but as the disastrous environmental impacts of those chemicals became apparent, usage shifted first to hydrogenated chlorofluorocarbons (HCFCs) and then to the hydrofluorocarbons (HFCs) that are predominantly used today. For more information about modern air conditioners, contact your local HVAC contractor.

Tags: , , ,
Posted in Services | Comments Off on Who Invented Air Conditioning?

Benefits and Disadvantages of Window and Through Wall Units

Monday, August 15th, 2011

When you’re trying to decide what type of air conditioner to get for your Troutdale home, you’ll first have to determine whether a central air conditioning system or smaller individual unit is best for you. These smaller air conditioners are generally installed either in a window or through the wall of your home, and they can provide excellent cooling under the proper conditions.

If you’re still on the fence about what type of air conditioner to install in your home, here are a few items to consider:

  • Ducts – If your home already has ductwork installed for a central forced air heating system, it should be relatively easy to hook up a central air conditioner. But if there are no ducts currently in place, your installation costs will be a lot lower with window or wall mounted units.
  • Portability – Most window units are designed to be removed and stored at the end of the summer, so you can have your windows back and not have to look at that unit all winter long. Through wall units aren’t generally removable, but because they don’t take up window space and provide a more thorough seal against the elements, that’s not as much of a concern.
  • Aesthetics – With both window and through wall units, you’ll have something protruding into your room at least a few inches. These types of units are hard to hide, particularly when compared to the simple air ducts that central air conditioning systems use.
  • Flexible Sizing – No matter how big or small your room is, you should have no trouble finding a window or through wall unit to match it. A central air conditioning system needs to be sized to fit the entire house. If you’re only inclined to use air conditioning in two or three rooms during the hottest months of the year, you may not want to pay to cool the entire house all of the time. Smaller units provide that type of flexibility.
  • Affordability – Installing a central air conditioning system, even if you already have ducts in place, is a large undertaking and likely to cost you several thousand dollars up front. On the other hand, small window and through wall air conditioners are available for as little as $200 and you can buy more whenever you’re ready to spend that extra money. You can also usually install a window unit yourself, and the cost of having a through wall unit installed is minimal compared to that of a central AC unit.

Tags: , , , , ,
Posted in Services | Comments Off on Benefits and Disadvantages of Window and Through Wall Units

Pest Control

Wednesday, July 6th, 2011

Pests are a virtual inevitability in every home at some point, so it is important for every homeowner to know how to deal with that unwelcome stranger when it comes poking around.

Insects Be Gone

From ants to roaches, insects love to make themselves right at home. They invade in search of food, water, and habitable space, and they don’t care whether they are wanted or not. Here are some helpful hints to get rid of these multi-legged tenants.

Borax works just as well as a pest poison as more expensive commercial products. For roaches, sprinkle a bit in your cabinets. Make sure to take extra care that your dishes are free from the residue. Avoid areas where the borax could affect children or pets. Likewise, make a homemade ant trap by mixing equal parts sugar and borax in a jar with holes punched in the lid.

Ants are also repelled by the calcium carbonate found in common chalk. Draw a chalk line around any visible ant holes to keep them trapped inside. Keep termites away by keeping your yard free of wood debris and standing water. Fix any leaks immediately and clear out any thick growth close to the house.

Furrier Pests

Insects are not the only pests to be concerned with, as sometimes intruders come in a larger, furrier form. Mice and other small rodents are fairly common inhabitants, as well as the occasional garbage-scavenging raccoon.

The best way to keep animals from invading your home is to keep potential entry holes sealed. For a temporary fix, try stuffing small holes with steel wool and covering larger ones with wire mesh. Eventually, however, you should have all holes permanently filled by an exterminator or a contractor who is familiar with the strategies needed to stop these unwanted invaders.

In general, it’s best to avoid poisons that put your family or pets at risk. Not only do poisons create a dangerous environment, they often result in dead pests in your walls or under your floorboards where they are hard to remove. Traps are always best so you know where the rodents are at all times.

If you have tried these tricks to no avail, or you have a serious infestation problem, don’t be a hero. Call a professional and have the whole home treated so you can rest easy.

Tags: , , , ,
Posted in Services | Comments Off on Pest Control

Save Money with Coupons – HVAC and Plumbing

Friday, June 24th, 2011

HVAC and plumbing services are not things that you usually think about using coupons for. After all, you almost never call an HVAC specialist or plumber unless there is an emergency, and that means you probably do not have time to go hunting for a coupon. You are going to go with the person who is able to respond quickly and get the job done fast.

But that does not mean you should have to pay too much for emergency or other HVAC and plumbing services. In fact, if you know where to look, you can find coupons for great deals on anything from annual maintenance to full new system installation. Of course, not all of these deals are that great. But even saving a little on each service will add up over time. Plus, gathering up some coupons ahead of time will make it easier for you to choose a good HVAC service or plumber because you can see which one in your area offers the best deals.

So where do you find these great coupons? Well, a lot of them can actually be tracked down online. A simple search for HVAC or plumbing coupons in your area should turn up quite a few results for services you could use now or in the future. Some of these offer quite substantial savings as well, so even if they are for something you do not need at the moment, take a look at the expiration date. Even if you are not sure you will be able to use the coupon in that space of time, there is certainly no harm in holding onto it just in case.

It is also important to remember that you do not need to stay with the same company that installed your system, for instance, if you can find a coupon for great savings on annual maintenance with someone else. Just about every company in this field is well versed in handling all types of HVAC or plumbing equipment and they can easily take care of a system that another company installed.

Particularly if you are not satisfied with the service that you get from the company you are now using, look around for coupons from someone else. That is a great way to figure out which new company is worth a try.

Tags: , , ,
Posted in Services | Comments Off on Save Money with Coupons – HVAC and Plumbing

« Older Entries
Newer Entries »