Posts Tagged ‘Marion County’

Preventative Maintenance For Your Home Heating System

Monday, February 6th, 2012

Ben Franklin once said, “An ounce of prevention is worth a pound of cure.” His famous quotation can apply to many things in life, including the heating system in your home. While heating systems in Ben Franklin’s time consisted of wood burning stove and fireplaces requiring little maintenance, today’s sophisticated furnaces and building controls require a good dose of preventative maintenance in order to avoid mechanical failures and inefficient operation.

For example, a furnace runs better and lasts longer when you maintain a regular schedule of filter cleaning or replacing. A dirty or clogged filter can restrict airflow from the furnace into your home’s ventilation system and cause the furnace to work harder, putting more wear and tear on it and taking months, if not years, off of its useful life. If your furnace uses disposable filters, check them every month and replace them if necessary. If your furnace uses an electronic filter that requires cleaning, check it on a monthly or semi-monthly basis and clean it with soapy water and a hose. Be aware of the change of seasons which could add extra pollutants into the air like pollens, ragweed, and cottonwood. This debris easily finds its way into the filters and creates an unhealthy indoor environment.

You can also perform a simple visual inspection of working components inside your furnace by removing the access cover and checking – with a flashlight – for loose fan belts, frayed electrical wires, or a build-up of dirt and dust. Simple solutions include tightening or replacing belts, repairing wiring, and vacuuming out dirt and dust with a hose attachment. All of these actions will keep your furnace working better and prevent future failures.

You can also do a visual check of your home’s ventilation system, paying close attention to any cracks in duct seams or holes in flex ductwork. Using sealing cement or duct tape can usually fix these problems and allow for better, unrestricted air flow. Again, these actions will help your furnace work more efficiently and avoid premature failures.

Maybe the best advice for preventing heating system breakdowns is to have a regular maintenance schedule with a local qualified heating contractor. Most contractors can set you up with annual furnace and ventilation system inspections. Having a service agreement – as a rule – gives you priority emergency repairs and discounts on parts and services. Besides that, planned maintenance is also preventative maintenance, something that will give you peace of mind in the long run.  Please contact your HVAC experts at Clean Air Act if you have any questions about these preventative maintenance ideas.

Rhododendron Heat Pump Question: When Do You Need a Backup Heating System?

Friday, January 27th, 2012

A backup heating system is sometimes necessary for Rhododendron homeowners who heat their homes with an air-source heat pump. This style of heat pump transfers the heat from the outside air to your home in the winter, and it pushes the warm air outside the home in the summer. Although some systems are efficient enough to work in colder climates, most heat pump systems require a backup heater when temperatures drop below 20° F.

Furnaces are commonly used as a backup heater for air-source heat pumps, especially since the furnace fan blower can help distribute the hot air throughout the home. Although they are more expensive to buy and install, geothermal heat pumps typically do not require a backup heating system. These are also called ground-source or water-source heat pumps since they draw in heat from the ground below the house or from a nearby water source. Because they take advantage of the ground or water temperatures, they are also easier to maintain and have lower operating costs.

Getting the most cost-efficiency from a geothermal heat pump will depend on several factors, such as the size of your property, the temps of the subsoil, and access to local water sources. You will most likely not have to install a backup heating system with a ground-source or water-source heat pump; however, it is important to think about the installation costs and the variables that need to be in place before deciding on this type of heat pump.

Absorption heat pumps use a heat source, such as natural gas or solar-heated water, instead of electricity. Natural gas is typically used for absorption heat pumps, so they are also called gas-fired heat pumps. Depending on the source of the heat, you may or may not need a backup heating system. It’s always best to speak to a professional heating and cooling contractor if you are not sure when it’s necessary for a backup heating system.

Call The Clean Air Act Inc. if you have any questions about a backup heater for your Rhododendron home.

Will Switching to Geothermal Heating Save Me Money?

Monday, January 9th, 2012

There are simply a ton of different types of heating systems available for your Colton home and they are each more appropriate in different situations. However, some are certainly always going to be cheaper to operate than others, although that alone may not make one or the other right for you.

In the case of geothermal heating systems, the operating costs are definitely quite low. But those are not the only costs you will have to think about when you are considering what type of heating system to put in your home to keep your heating bills down.

Geothermal heating systems do not actually generate heat – they absorb it from the ground. Because of this, they actually use very little energy when they are running. All you are really paying to power is the fan that blows the heated air around your house. Also, because geothermal heating systems are more efficient at extracting heat in below freezing conditions than traditional heat pumps, they can continue to keep you warm on their own in more extreme conditions.

Traditional heat pumps, while they also cost very little to operate, do sometimes need to be supplemented by more conventional forms of indoor heating like a furnace when temperatures outdoors get too low. This is not the case with geothermal heat pumps, so if you live somewhere that has colder winters, a geothermal heat pump may be just what you are looking for. Of course, you can always opt for a furnace instead, but these will definitely cost more to run than either type of heat pump.

When you are trying to assess whether or not switching to a geothermal heating system will save you money, you first have to start with the heating bills you currently have. Then, factor in the cost of the geothermal heat pump installation as opposed to the installation of a more conventional system.

You are then in a position to see whether or not the amount the geothermal system will save you each month is enough to offset the higher cost of installation within a reasonable amount of time. Of course, the savings will always eventually add up over time, but if the length of time it will take you to break even is the same or longer than the expected life of the system, it is probably not worth it to invest in this type of heating.

What Size Heat Pump is Right for My Home?

Wednesday, November 30th, 2011

One of the most important questions to answer when purchasing and installing any new heating or cooling system, no matter what type, is what size is best for your Sherwood home. You need something that has enough capacity to heat or cool your whole home comfortably; otherwise your house will consistently be at an undesirable temperature.

Some people might think that the quickest solution to this problem is to just buy a system that they are sure has a capacity larger than the size of their home. You may even be tempted to get the biggest model out there, under the logic that the biggest is the best and it will be sure to be able to cover your whole house.

While this line of thinking might make sense to you, it’s actually not a good idea. The problem with this “solution” is that you can wind up with a heat pump that is considerably too large for your needs, which means your home will consistently be either too cool or too hot, and your energy bills will be unnecessarily high.

The best way to choose a new heat pump is to have a professional do a load calculation in your home. This can be a highly technical process, so it is best to leave it to the pros. However, here are some quick tips and other things to consider on the subject:

  • There are a lot of variable to consider in doing a calculation like this. A contractor doing a load calculation will consider the type of construction, what kind of insulation you have installed, what kind of windows you have, whether there is an attic, how many people live there and many more factors.
  • It never hurts to shop around. Get a few estimates from different area contractors, rather than just going with the first opinion.
  • Also, since heat pumps are used for both heating and cooling, different contractors may opt to do the calculation in different ways. Some will estimate capacity based on heating, while others will base it on cooling. Ask to see which is the case for each estimate you receive.
  • If you are getting a new heat pump as a replacement for an existing one, or even a different heating/cooling system, check the capacity of the unit you are replacing. That can be a good place to start. You will at least be in the right ballpark.

All of this means doing some extra leg work up front, but getting the proper sized heat pump is well worth the effort.

Happy Thanksgiving!

Thursday, November 24th, 2011

Happy Thanksgiving! We plan to celebrate by eating lots of turkey and enjoying some time with our loved ones, and we hope you do the same! Thanks for choosing us as your contractor. Here is a recipe from allrecipes.com for Double Layer Pumpkin Cheesecake, a treat that will get your holiday started off right!

Double Layer Pumpkin Cheesecake

“Cheesecake lovers will applaud this addition to the holiday dessert selection. A layer of traditional cheesecake is topped with a layer of pumpkin pie flavored cheesecake and baked. ”

INGREDIENTS:

  • 2 (8 ounce) packages cream cheese, softened
  • 1/2 cup white sugar
  • 1/2 teaspoon vanilla extract
  • 2 eggs
  • 1 (9 inch) prepared graham cracker crust
  • 1/2 cup pumpkin puree
  • 1/2 teaspoon ground cinnamon
  • 1 pinch ground cloves
  • 1 pinch ground nutmeg
  • 1/2 cup frozen whipped topping, thawed

DIRECTIONS:

  1. Preheat oven to 325 degrees F (165 degrees C).
  2. In a large bowl, combine cream cheese, sugar and vanilla. Beat until smooth. Blend in eggs one at a time. Remove 1 cup of batter and spread into bottom of crust; set aside.
  3. Add pumpkin, cinnamon, cloves and nutmeg to the remaining batter and stir gently until well blended. Carefully spread over the batter in the crust.
  4. Bake in preheated oven for 35 to 40 minutes, or until center is almost set. Allow to cool, then refrigerate for 3 hours or overnight. Cover with whipped topping before serving.

For more details, click here.

What Is Geothermal Heating?

Wednesday, November 16th, 2011

Having a geothermal heating system installed in your Hubbard home means that you will actually be able to heat your home with heat extracted from the ground. If this sounds a bit preposterous to you, you are certainly not alone. But this type of home heating does actually work and the technology is not actually that much different from what is used in a standard heat pump system.

Regular heat pumps are able to remove heat from the outdoor air and transfer it into your house to maintain a comfortable temperature in the winter. You may think that there is no heat in the outdoor air in the winter, but that is not actually the case.

Air contains a substantial amount of heat even at very cold temperatures, and heat pumps are able to work quite well, particularly when the outdoor temperature is above freezing. Conveniently, the same process used to heat your house in the winter can be reversed in the summer to extract heat from the indoor air, providing you with a year round home comfort solution.

Geothermal heating works in much the same way, except that geothermal heat pumps extract heat from the ground rather than the air. In order to accomplish this, a loop of pipes is installed in the ground near your house and your geothermal heating system will pump a liquid, generally either antifreeze or water, through those pipes.

As it passes through the pipes, the liquid will absorb heat from the ground and carry it back to a heat exchanger within your house. At that point, the heat from the liquid will be released into air, which is then blown throughout your house.

And just as conventional heat pumps can cool your house in the summer by removing heat and pumping it outside, so too can geothermal heating systems. They do this simply by letting the liquid flowing through the pipes absorb the heat from inside air and then release it into the ground as it travels through the pipe loop below your house.

Because the ground is never as cold in the winter or as hot in the summer as the air, geothermal heat pumps are actually able to work effectively in more extreme conditions than many traditional heat pumps. However, because they require an entire system of pipes to be installed underground, they can be quite a bit more expensive initially as well.

Common Heat Pump Problems

Friday, November 11th, 2011

Heat pumps are great pieces of machinery to have in your Aurora home, but they are not perfect. They come with their own problems and issues. Usually these can be fixed pretty easily, but it’s good to know what you are looking for.

Below are some common problems encountered by heat pump owners, along with some brief troubleshooting and repair advice. However, for any serious repair job, it is recommended that you call in a professional to fix the problem. This is to ensure the best performance of your heat pump, as well as for your own safety.

  1. No Heat – Obviously, this is a problem. A heat pump should do two things—heat and cool. If it’s not heating at all, something is wrong. Sometimes, this is just a matter of the power supply being interrupted. Press the “Reset” button on the power supply. If that does not fix it, it could be that the power supply has failed or the motor is overloaded.
  2. Incorrect Temperature – For example, you set the thermostat at 72 degrees, but even after several hours, the temperature won’t get over 70 degrees. This can be a problem with the sensor in the thermostat or with the heat pump itself. However, it could also just be the result of very cold temperatures outside. Heat pumps have trouble keeping up when the weather is consistently below 30 degrees Fahrenheit or so, so it may just need help in the form of a supplemental heat supply.
  3. It’s Noisy – Heat pumps are generally designed to run very quietly, so if you notice a lot of noise, there is probably something going on. Common culprits for this type of issue include loose connections, like screws, nuts and bolts. Check for any loose fittings on the heat pump. Also, make sure the contractor who does your annual heat pump inspection tightens these fittings as part of his maintenance routine.
  4. Frozen – This can be indicative of a few underlying problems, but the most common is dirt in the air filter. When filters get clogged, the heat pump can get frosted, ultimately leading to freezing. Check the air filter and make sure to change all air filters regularly.

Heat pumps can experience other issues, but these are some of the more common ones. Generally, though, heat pumps are pretty headache-free machines. Be sure to call a professional repair person is you experience any issues with your heat pump.

How Efficient are Heat Pumps for AC and heating?

Monday, October 17th, 2011

Heat pumps are actually remarkably efficient when compared to some of the home heating alternatives out there in Portland. Especially if you’re already using electricity to heat your home, you can get generate huge savings on your monthly energy bills by switching to a heat pump system.

As their name suggests, heat pumps remove heat from the air and transfer that heat from one area to another. That means that in the winter, your heat pump will remove the heat from the air outside your home and pump that heat in to heat your home. During the summer months, that process is actually reversed, and heat pumps are able to cool your home by collecting the heat from your indoor air and pumping it outside.

Since heat pumps are actually just moving heat from one place to another rather than generating it all on their own, they don’t require much energy at all to operate. While you can buy furnaces that are as much as 97% energy efficient, they’re still using more energy than a heat pump would. The fact that the furnace is turning the vast majority of the energy that it uses into heat doesn’t mean that it still doesn’t require more energy to operate.

Just because heat pumps are more efficient than many other types of heating systems, you can’t just assume that all heat pumps are equally energy efficient. Just as different types and models of furnaces have different energy efficiency ratings, so too do the many types, sizes and models of heat pumps. Make sure you thoroughly compare your options before you settle on the right system for your home.

The energy efficiency rating of a furnace is easy to recognize, as each of them comes with a standard AFUE rating. If you’re looking to switch to heat pumps, however, it’s easy to get confused when you’re trying to compare the energy efficiency of various models.

Heat pumps actually have two separate measurements for energy efficiency. These are the seasonal energy efficiency ratio (SEER) and the heating seasonal performance factor (HSPF). Energy efficiency measurements for heat pumps reflect both the cooling and heating efficiency of the system, and so what’s best for you may vary depending on what you’re more likely to use your heat pump for. If you have any questions, contact your local contractor.

Turn that Thermostat Down a Degree and Save Money

Monday, September 26th, 2011

There are literally dozens of things you can do to cut back on your heating (and cooling) costs in Troutdale. These range from things like getting a high energy efficiency system to just making sure that you have adequate insulation in all parts of your house. But too many people overlook one of the simplest things that you can do to cut down on your monthly heating bill, and that is to turn the thermostat down.

Of course, you did not pay for that high tech home comfort system just so that you could walk around cold all winter long. You certainly want to keep your house at a temperature that is comfortable, but what does that really mean?

The normal default setting for a home heating system is usually somewhere between 72°F and 75°F. If you have your thermostat set somewhere in this range in the winter, you are probably quite comfortable indoors. In fact, you might not even need a sweater. But would you really notice if it was a degree or two cooler? Would it be incredibly inconvenient to put on a sweater or sweatshirt after all?

The truth is that most of us will be just as comfortable at 69°F as we are at 72°F, and the effect that small adjustment can have on your heating bill is actually pretty significant. In fact, you will save an average of 3% on your monthly bill for every degree you turn your thermostat down. Drop the temperature down by three or four degrees and that will give you up to a 10% monthly savings – hardly something to turn up your nose at.

And setting the regular temperature in your house a bit lower is not the only way your thermostat settings can save you money. You will also save quite a bit if you take the time to turn down the temperature when you leave the house and when you go to bed at night. There simply is no reason to pay to heat your house when you are not there and you will certainly be rewarded with a lower energy bill for your efforts.

The Preventative Maintenance That Will Save You the Most on your HVAC System

Friday, September 16th, 2011

Having a high performance, energy efficient HVAC system will save you a good deal of money in terms of your monthly heating and cooling bills in Estacada. But that efficiency will not last unless you also take the necessary steps to keep your equipment in good working order. While regular maintenance visits from a professional HVAC technician are an important part of this, there are also several things you can do on your own to keep your equipment running at peak efficiency.

  1. Keep it Clear – The first thing you should do is to make sure that there is plenty of space cleared around your outdoor unit. Whether it is the condenser and compressor for your air conditioning system or part of your heat pump, that outdoor equipment needs to have plenty of space to vent hot air. Also, the space will mean that debris is less likely to develop inside the unit.
  2. Clean the Condensing Coil – While your technician will do this when they make their annual visit, it is best to clean your coil more than just once a year. Just make sure that the power is turned off to your unit before you begin. This will help the unit cool air more efficiently and can prevent a whole host of other problems from developing.
  3. Check on the Blower – If your blower is not working right or the blade is clogged, your HVAC unit will not work properly. Make sure your blower fan is free of all debris and that is turns freely once you have cleaned it. If you are still having a problem with it, you may have to call a technician for repairs. Cleaning the blower out on a regular basis, however, should keep this from becoming a problem you need a professional for.
  4. Air Filters – You should also make sure you change your air filters regularly. This can help to keep your indoor air clean and healthy and it will also enable your HVAC system to run more efficiently.
  5. Clean it Out – Clean out any debris that you can reach from any part of your system. Just make sure any time you work inside your HVAC system that you have all of the power turned off. Anything from leaves to dust can get in there and cause a problem if it is allowed to build up over time. As long as you are on top of things and keep to a regular schedule of maintenance, none of this should take you very long.