Posts Tagged ‘Hillsboro’

How Does Natural Ventilation Work?

Monday, May 21st, 2012

Traditional ventilation systems in Hillsboro require the use of mechanical air handlers and fans to move air between the inside and outside of your home. However, there are alternatives that naturally pull fresh air into your home. Not only are these systems better for the environment because they use less electricity, they create a more natural flow of air that add to the comfort of your heating and air conditioning systems.

How Does Natural Ventilation Work?

There are two primary ways to employ natural ventilation in a building – either stack ventilation or wind driven ventilation. The former uses much lower pressure levels which means most buildings with natural ventilation opt for wind driven ventilation. While there are specific benefits to both systems, the best engineered systems tend to use both for a more even approach to natural ventilation.

Stack ventilation is incredibly simple. The idea is that warm air rises so when air enters a building, it heats up, both because of the people in the building and because of the indoor temperature. As the air rises and exits the building, it creates a vacuum that pulls new air in through vents placed at ground level. Simply opening windows can create this effect.

Wind driven ventilation uses the same concepts of stack ventilation but takes advantage of building design and the landscape to create pressure zones around the home. For example, the pressure on the side of a building that gets buffeted with wind will almost always be higher than the opposite side. Using ventilation based on this concept allows designers to create partial vacuums to draw new air in and expel old air.

What Is Best?

Most buildings today are built using mechanical ventilation because it can be better controlled and because it is more reliable than natural ventilation. That said, there are an increasing number of natural ventilation solutions for indoor air quality using modern technology to control the opening and closing of vents. For a small home, a system that allows you to have the natural ventilation benefits of an open window without losing all the energy you pay so dearly for is fantastic. Just be sure it will fit your specific needs by calling The Clean Air Act.

The History of Heat Pumps

Monday, April 2nd, 2012

Thermal energy is the natural movement from warm temperatures to colder temperatures creating energy in the change of temperature to the mass.  A heat pump typically is a device that moves the air (or other matter) in the opposite direction from its natural flow.

A heat pump often uses an intermediate fluid called a refrigerant which absorbs heat as it vaporizes and releases the heat when it is condensed,  using an evaporator to absorb the heat (or energy) from inside an occupied space and forcing this heat to the outside through the condenser. The key component that makes a heat pump different from an air conditioner is the reversing valve which allows for the flow direction of the refrigerant to be changed, allowing the heat to be pumped in either direction.

Timeless Technology

While mechanical movement of this energy, what we can actually call a pump,  has been a relatively recent invention,  the concept of this principal of physics has been in use since ancient times. Harnessing the power of geothermal energy (produced from the heat of the earth itself), natural hot springs “pumped” warm air into cool spaces in China and Europe thousands of years ago.

By 1852, Lord Kelvin had theorized the heat pump, but it took nearly 100 years to actually build one.  In the last half century, the technological advances have made heat pumps part of our lives in many ways.

First Pump

In the 1940s a man named Robert Webber was motivated to build the first known heat pump while tinkering with his refrigerator.  Accidently burning his hand on the outlet pipes of the cooling system, he was quite painfully awakened to an idea about the transference of heat.

Recognizing the freezer was constantly producing heat to cool its interior, he connected the outlet pipe to the storage tank of his hot water heater, extended that into a flow through pipes which heated air nearby, and  then used a fan to blow the warmth into another room.

The first heat pump was a crude, but effective method to provide comfort.  Creating a full-size version soon after, Wagner could heat his entire home.

Heat and Electricity

Today Portland heat pumps are built in many ways and shapes to heat or cool buildings of many sizes.  Combined with geothermal forces close to the Earth’s surface or potentially  deep within its fiery core, heat pumps are able to energize the turbines that can produce huge amounts of electricity

As technological improvements are refined during this time of climate change and dwindling fossil fuels, heat pumps promise to play an important part in our futures.

If you are interested in having a heat pump installed in your home, call Porland HVAC professionals Clean Air Act Inc.!

 

How Does Geothermal Energy Work?

Wednesday, January 11th, 2012

Geothermal energy is energy extracted from the ground. This energy is in the ground in the first place because the ground absorbs the heat coming from the sun. This heat is always there, even when it is very cold outside. In fact, even when the ground appears to be frozen, you can actually extract plenty of heat to keep your Tualatin home nice and toasty.

While this may at first appear to defy logic, the way that geothermal energy can be used for heating your home is actually quite simple. A geothermal heating system typically consists of an indoor air handler with a fan, a series of air ducts for the heated air to travel through and a closed loop of pipe that extends into the ground below and around your home.

This closed loop of pipe is actually where the geothermal heat is collected. Some type of liquid, usually water or antifreeze, will be continuously run through this pipe loop. As the liquid passes through the area of pipe that is below ground, it will absorb the heat from the surrounding soil. Once the liquid makes it back up to the air handler, the heat is able to disperse, heating the air in the chamber.

This heated air is then circulated throughout your house through the ducts by a fan. After it has released its heat into the air in your home, the liquid will cycle back into the ground to absorb more. This allows a geothermal heating system to provide you with a constant supply of warm air.

Unlike a furnace, which mixes in blasts of very hot air with periods of inactivity to try and keep your Tualatin house at a constant temperature, a geothermal heat pump is able to provide a more consistent flow of air that is just the right temperature to keep your home comfortable. This means that these types of heat pumps are running just about all of the time as opposed to furnaces, but they are designed to work this way and the constant operation does not cause any excessive wear and tear.

Another great benefit of geothermal heat pumps is that they are able to keep your house cool in the summer as well. Just as the ground is warmer than the air in the winter, it is also cooler in the summer. That means that heat removed from your indoor air can be transferred to the ground in the same way that it was transferred in during the winter.

How to care for your heat pump filter

Wednesday, January 4th, 2012

On the whole, heat pumps are efficient, durable and effective to have in your Estacada home. They are built to run all year round without needing any more maintenance than your average furnace or air conditioning system and they have an average lifespan comparable to those other types of home comfort systems as well.

That’s not to say that there aren’t things you can do to keep your heat pump in good working order, however. Keeping up with the professional maintenance visits is an important step to take along these lines to be sure, but there are also some other things you can do on your own as well to help ensure the continued efficiency and health of your heat pump system.

Proper filter care is an important part of keeping your heat pump working the way it should. If you don’t have a heat pump yet but are thinking of getting one, make sure you have the installation technician show you where the filter is located and how to replace it.

If your system’s already been in place for some time, you can still find out how to care for the filter from your annual maintenance technician or you can probably even find it on your own by taking a close look at your heat pump. The filters are meant to be removed on a regular basis so they’re typically not hard to get to. However, you should always be sure that all of the power to your heat pump is turned off before you open it up to try and find, replace or clean the filter.

Most heat pump filters are meant to be changed or cleaned about once every 90 days or so. However, the specific requirements for each system can vary considerably, so you should be sure to find out what is recommended for the model of heat pump that you have.

Also, you’ll want to know what type of filter you have so that you can purchase the appropriate replacement. The model number for each filter should be clearly printed on it, so simply slide your current filter out and make note of the number so that you can purchase the correct type as a replacement.

Most heat pumps have replaceable filters, but some still do have permanent filters that are meant to be cleaned and then returned to service. If you have one of these types of filters, be sure to read the instructions for cleaning carefully before proceding.

Heating Guide: Heat Pump Load Calculation

Wednesday, December 21st, 2011

When purchasing a heat pump, the first thing you should do is determine what type of heat pump you want and how big it needs to be to provide ample heating and cooling to your Hillsboro home. If you’re unsure what you need, here are some tips to size a heat pump for your home’s particular needs.

The Importance of Sizing

Before buying anything, consider the cost of an oversized heat pump. A lot of homeowners opt for the biggest device on the market, but they don’t realize that they’re paying more than necessary for their device. An oversized device cycles on and off more often than is necessary and wears down much faster, resulting in an increased electric bill and faster wear on the device. It’s not good for your heat pump or your wallet.

How to Size

To correctly size a heat pump, the first step is to perform a load calculation. This is done by measuring the total volume of the rooms being heated (in cubic meters) and then determining the heating factor based on the type of insulation used.

There are different measurements depending on the type and R-rating of your insulation. For example, a single external wall without any additional insulation has a heating factor of 15. The number of external walls, the insulation in those walls and/or the ceiling and the rating of the insulation will determine the total heating factor for the room.

You will then divide the room volume by the heating factor to determine the number of KW (converted to BTUs) needed to heat that particular room.

Professional Sizing

The reason it is so important to call a professional is that certain things, like poorly insulated windows, cracks in the foundation, leaks in the ducts and other issues can have an impact on the overall heating factor measurement. Additionally, the type of heat pump you choose must be effective when connected to an air handler for your entire home. A professional can make these measurements and ensure the right sized device is selected.

If you’re unsure about anything related to sizing and selecting a new heat pump for your home, call a professional in. They will perform a full load calculation and present your options for a new heat pump based on those calculations.

Why Should I Clean My Air Ducts?

Monday, October 24th, 2011

Everyone in Hillsboro knows it’s important to keep your home’s air ducts clean, but why? Many people ask that question, and it’s important to understand why you are doing such a chore so that it has a purpose.

Actually, there is no one reason why your air ducts need to be kept clean—there are several, all of which are connected to one another. Here are five of them for you to consider:

  • Efficiency – Clean air ducts allow the air to flow through much easier and more readily, so your furnace, air conditioner or heat pump won’t have to work as hard to ventilate the house. This makes for more efficient operation and lower energy consumption.
  • Performance – When your HVAC system does not have to work as hard to push air through the ductwork, it will perform better. Your home will be more comfortable and better ventilated.
  • Longevity – Because your HVAC system is operating more efficiently, it will be able to perform at a high level for a longer period of time. Well-maintained systems last longer than those that are not taken care of, and cleaning the ducts is part of good HVAC maintenance.
  • Savings – Clean ducts can save you a lot of money over time. Your energy bills will be lower because of how efficiently the whole system is running. You will spend less on maintenance and repair costs, because the system is being well-maintained. And, as an added bonus, your ducts will last longer because of the decreased risk of corrosion and damage from being dirty.
  • Health – Last, but certainly not least, clean air ducts mean clean air, which is important for your health and your family’s health. Especially if you have pets, if you smoke or live with a smoker, or if anyone in the house has allergies or asthma, cleaning your air ducts is a must. You could even include the decreased frequency of doctor visits under the savings mentioned above!

Clean air ducts go a long way toward making your home a pleasant place to live, as well as making home ownerships as worry-free as possible. Yes, it entails some extra work and/or expense, but in the end the benefits far outweigh the cost.

Simple Household Cleaning Tips on How to Maintain Good Indoor Air Quality

Wednesday, September 14th, 2011

There are a lot of reasons to clean your Canby house. Guests, children, pets, simple peace of mind – without the right amount of cleaning, a messy house can quickly get out of control. But, don’t forget the health benefits of removing excess dust and sediment from your home with regular cleaning. Of course, air cleaners are one solution, but there are other ways you can help improve your air quality. To ensure your indoor air quality stays good, here are a few basic cleaning tips you can implement right away.

  • Regular Vacuuming  – Most people vacuum occasionally when it’s obvious that carpets are getting a little messy. Consider increasing the frequency of your vacuuming to at least 3-4 times per week, possibly more, especially if you have pets. Regular vacuuming removes a lot of the airborne particles that can get into your lungs and cause allergies or asthma flare ups.
  • Remove Junk from Floor Spaces – Toys, garbage, clothes, and other random junk sitting on the floor can create air quality problems, especially if they are near or around vents.
  • Bathe and Brush Pets – Pet dander is a top contributor to indoor air quality problems. Bathe and brush your pets once a week to reduce hair loss and get rid of all that excess dander that builds up over time. Consider it an investment in the cleanliness of your home.
  • Shoes Outside – Shoes bring in pollen and other outdoor pollutants. Take them off outside and you will reduce the number of contaminants that make it inside.
  • Remove Moisture from Bathrooms – Bathroom moisture results in mold growth and the development of other allergens. Wipe down the walls of your shower and mop the floor daily to remove excess moisture after showers.
  • Food Waste – Throw away food waste immediately. Food in the sink or garbage can attracts bacteria and bugs and can result in mold growth very quickly. Consider a compost bucket or pile outside where food waste can be disposed or purchase a garbage disposal to get rid of it immediately after eating.

There are dozens more little things you can do that will reduce the amount of allergens and pollutants that build up in and around your home. Consider creating a simple calendar schedule you can follow from day to day to keep your indoor environment clean and healthy.