Archive for October, 2011

Happy Halloween!

Monday, October 31st, 2011

Happy Halloween! Candy and costumes make any day fun; we hope you have a fantastic time trick or treating! Remember to be safe this holiday, and don’t forget it is time to start thinking seriously about fall maintenance for inside and outside your house. A quick tune up of your heating system will save you some trouble during this upcoming holiday season!

Is Your Heat Pump Malfunctioning? (and Happy Halloween Weekend!)

Friday, October 28th, 2011

Happy Halloween weekend from everyone at Clean Air Act Inc.! We hope you have a fantastically spooky time! And since there is nothing more frightening than a broken heating system, here are some warning signs that your heat pump is malfunctioning.

In a perfect world, you would never have to worry about things like malfunctions or repairs. Everything would just work without ever needing to be maintained or fixed, and you could spend your time on energy on more enjoyable pursuits.

Unfortunately, no such perfect world exists. Things wear out and break down, often at the least opportune time. And of course, your heat pump is not immune. Despite being a great all around machine, a heat pump can malfunction, just like anything else.

But how can you know whether your heat pump is not working right? Here are some signs and symptoms that are often indicative of common heat pump problems:

  1. Too Much Noise – Whether emanating from your car or your usually quiet heat pump, noises are often the first sign that something is amiss. You should expect your heat pump to make some noise; the compressor and air handler are two culprits. However, if it starts making more noise than it did before, something may be up. Sometimes this is as simple as some loose fittings, but it’s still something that should be checked out.
  2. The House Is Too Cold – Obviously, if you get a heat pump to heat your house, you expect it to do just that. So, if your home is too chilly, you know something is amiss. If it’s way too cold, the heat pump may not be running at all, which can be the result of a serious malfunction. If it is only a few degrees below where you set it, it may be a different problem. It could be that something is malfunctioning in the heat pump, but it could also be that the outside air is too cold for the heat pump to keep the house warm. In that case, the best solution is supplemental heating.
  3. The Heat Pump Turns Off Too Soon – If your heat pump seems to be shutting off too quickly, it may be short cycling. That means that it is turning off before getting through its entire heating or cooling cycle. Frequently this is simply caused by dirt or debris around the outdoor coil, in the air handler or in the filter. Check these areas out and clean them. In general, you will want to keep the various components of your heat pump clean in order to ensure the best performance.

These are just some of the main symptoms of common problems. Other things can go wrong with your heat pump, although it is not very likely. As a general rule, if you notice your heat pump performing strangely or doing something it hasn’t done before, it’s best to get it checked out by a professional.

How to Clean the Parts of a Heat Pump

Wednesday, October 26th, 2011

It is very important to keep the heat pump in your Newberg home clean. It improves efficiency, helps performance and prevents malfunctions. Cleaning your heat pump should be part of your home maintenance routine in order to keep the house as comfortable and worry-free as possible.

That is all well and good, but how do you go about cleaning the components of your heat pump. It’s one thing to advise you to clean, clean, clean…but it doesn’t do much good if you do not know how. To correct that, here are some tips to help you clean the different parts of your heat pump.

Caution: before doing any maintenance on your heat pump, including cleaning, be sure to turn off the power to the unit. This is a necessary safety measure.

Filters

  • If you use disposal air filters in your heat pump, skip this part. Just make sure to change them regularly, in accordance with the manufacturer’s instructions.
  • To clean air filters, follow the directions of the manufacturer that were included with the filter. This is also a good time to double check that the filters are installed properly.
  • Clean or replace your filters monthly during heavy use seasons, such as the warm summer months and cold months of late fall and winter.

Coils

  • Remove any debris from the outside of the coils and the surrounding area. Sticks and leaves may have accumulated near the outdoor coils, so just brush them away.
  • Using a soft brush attachment, vacuum the exterior of the coils. Take care not to bend or dent the coils.
  • Using a hose with a spray attachment, flush the coils with water from the inside out. This will remove any stubborn debris. Take care not to spray any electrical components, such as the fan or any nearby wires.
  • While you are inside the unit, vacuum the bottom inside to get rid of any more stray debris.

With that done, put everything back, replace the grille covers and power the heat pump back on. It should run smoothly with a fresh filter and no debris to gum up the works. Clean the coils every few months to keep the heat pump in tip top shape.

Why Should I Clean My Air Ducts?

Monday, October 24th, 2011

Everyone in Hillsboro knows it’s important to keep your home’s air ducts clean, but why? Many people ask that question, and it’s important to understand why you are doing such a chore so that it has a purpose.

Actually, there is no one reason why your air ducts need to be kept clean—there are several, all of which are connected to one another. Here are five of them for you to consider:

  • Efficiency – Clean air ducts allow the air to flow through much easier and more readily, so your furnace, air conditioner or heat pump won’t have to work as hard to ventilate the house. This makes for more efficient operation and lower energy consumption.
  • Performance – When your HVAC system does not have to work as hard to push air through the ductwork, it will perform better. Your home will be more comfortable and better ventilated.
  • Longevity – Because your HVAC system is operating more efficiently, it will be able to perform at a high level for a longer period of time. Well-maintained systems last longer than those that are not taken care of, and cleaning the ducts is part of good HVAC maintenance.
  • Savings – Clean ducts can save you a lot of money over time. Your energy bills will be lower because of how efficiently the whole system is running. You will spend less on maintenance and repair costs, because the system is being well-maintained. And, as an added bonus, your ducts will last longer because of the decreased risk of corrosion and damage from being dirty.
  • Health – Last, but certainly not least, clean air ducts mean clean air, which is important for your health and your family’s health. Especially if you have pets, if you smoke or live with a smoker, or if anyone in the house has allergies or asthma, cleaning your air ducts is a must. You could even include the decreased frequency of doctor visits under the savings mentioned above!

Clean air ducts go a long way toward making your home a pleasant place to live, as well as making home ownerships as worry-free as possible. Yes, it entails some extra work and/or expense, but in the end the benefits far outweigh the cost.

Did You Change that Furnace Filter?

Friday, October 21st, 2011

No matter what type of furnace you have in your Cornelius home, it’s important to remember to change or clean the filter on a regular basis. This is a relatively straightforward process and doesn’t require any professional help. However, if you’re not sure how to go about doing it, you can always have your heating technician demonstrate the process for you on their next regular maintenance visit.

Indeed, changing or cleaning out the furnace filter is an important part of regular furnace maintenance. However, it often needs to be done more than once a year. The specific amount of time that you can go between filter changes depends on many things, but typically it’s good to check on it once every three months or so.

If you have a lot of pets or if anyone in your family has severe allergies, it may be worth it to check and change the filter even more often. Check with the manufacturer to see what their recommendations are as well. Some high performance furnace filters can last up to six months or even a year, but you should still check on the filter periodically to make sure that too much hasn’t built up on it in between replacements or cleanings.

You’ll need to make sure you have the right type of filter to install as a replacement as well. You can get this information from the owner’s manual of your furnace, from the manufacturer or by taking out and examining the current filter in your furnace. Some furnaces also have filters that are meant to be cleaned and then put back in and the cleaning instructions are usually located near the filter itself.

Of course, in order to change your filter you’ll first have to be able to find it. Most of the time, the filter will be located near the blower towards the bottom of the furnace. However, if you’re not having much luck finding it, your owner’s manual should be able to tell you quickly where it is and how to remove it. Before you go to open the chamber and take the filter out, however, be sure you’ve turned off the power to the furnace.

Changing your furnace filter can help improve the air quality in your home and it is also very important when it comes to keeping your furnace running efficiently and effectively. The filters are there to trap airborne particles that can get into the blower and clog it up. When that happens, the performance of your furnace will likely drop and you’ll need to have a professional come out and complete the necessary repairs.

What kind of noise can I expect my heat pump to make?

Wednesday, October 19th, 2011

Whenever you’re looking into replacing your old home heating system or installing a new one in Canby, there are many different factors you’ll have to take into consideration. The amount of noise that the system you choose will make is certainly one of these. And in addition to the amount of noise that this system will make, you’ll also want to make a note of where the unit will be placed and so where the noise will be coming from.

While you may have had to worry a bit about the noise generated by heat pumps in the past, it’s not something you’ll have to take into consideration this time around. That’s because newer heat pumps are designed to be quieter than ever, providing the same heating and cooling power with only a fraction of the noise of some earlier models.

In fact, the only part of a heat pump that really makes any noise at all is the outdoor unit. Unless this needs to be located very close to your home or to a window of a room that you use often, chances are that you won’t even hear it at all.

However, if you live very close to your neighbors or don’t have a lot of outdoor space, you may have to put the outdoor unit close to the walls of your home. Even then, though, you’ll hardly notice the noise your heat pump makes. Years of research and redesigning have produced some of the quietest heat pumps yet and that’s what you’ll be buying if you’re in the market for one of these systems now.

Newer heat pumps have been tweaked and adjusted to minimize the amount of noise-generating vibrations they produce. In fact, you’ll probably find that most of these units make no more noise than your refrigerator. They’re efficient and quiet and can keep your home comfortable all year long.

How Efficient are Heat Pumps for AC and heating?

Monday, October 17th, 2011

Heat pumps are actually remarkably efficient when compared to some of the home heating alternatives out there in Portland. Especially if you’re already using electricity to heat your home, you can get generate huge savings on your monthly energy bills by switching to a heat pump system.

As their name suggests, heat pumps remove heat from the air and transfer that heat from one area to another. That means that in the winter, your heat pump will remove the heat from the air outside your home and pump that heat in to heat your home. During the summer months, that process is actually reversed, and heat pumps are able to cool your home by collecting the heat from your indoor air and pumping it outside.

Since heat pumps are actually just moving heat from one place to another rather than generating it all on their own, they don’t require much energy at all to operate. While you can buy furnaces that are as much as 97% energy efficient, they’re still using more energy than a heat pump would. The fact that the furnace is turning the vast majority of the energy that it uses into heat doesn’t mean that it still doesn’t require more energy to operate.

Just because heat pumps are more efficient than many other types of heating systems, you can’t just assume that all heat pumps are equally energy efficient. Just as different types and models of furnaces have different energy efficiency ratings, so too do the many types, sizes and models of heat pumps. Make sure you thoroughly compare your options before you settle on the right system for your home.

The energy efficiency rating of a furnace is easy to recognize, as each of them comes with a standard AFUE rating. If you’re looking to switch to heat pumps, however, it’s easy to get confused when you’re trying to compare the energy efficiency of various models.

Heat pumps actually have two separate measurements for energy efficiency. These are the seasonal energy efficiency ratio (SEER) and the heating seasonal performance factor (HSPF). Energy efficiency measurements for heat pumps reflect both the cooling and heating efficiency of the system, and so what’s best for you may vary depending on what you’re more likely to use your heat pump for. If you have any questions, contact your local contractor.

Common Furnace Problems

Friday, October 14th, 2011

When it comes to your Colton home’s furnace, you simply want it to work all of the time. But just like any other piece of equipment, your furnace will have problems from time to time. A few of these are relatively simple to fix on your own, but for the most part you’ll need to call in someone to take care of the repairs for you.

However, before you can do that, you’ll need to recognize that a problem exists at all. And the earlier you notice the warning signs, the better off you’ll be. It’s always better to get a furnace problem taken care of right away than to wait until your furnace stops working completely.

It’s also good to remember that quite often the problems you’re having with your furnace are really originating with your thermostat. This is usually welcome news, as thermostats are much cheaper and easier to repair and replace than many other parts of your furnace. In fact, even if your furnace isn’t working at all, it may only be the result of a faulty thermostat.

Another problem you may start to notice is that one part of your house is being warmed more than another part. When this happens, it can be a sign that there is something wrong with the furnace, but it may also be that the pressure in your duct system is not balanced properly. A simple rebalancing of this system can have your house heating evenly again in no time.

You may also realize that your furnace seems to be cycling on and off too often. When a furnace is working properly, it will come on for a considerable period of time and then shut off until the temperature in the house drops below the desired level. However, some problems can cause your furnace to complete many short cycles rather than fewer short ones.

If this is happening to your furnace, there are several possible causes. Something might be wrong with the blower on the furnace or the thermostat might not be feeding the furnace the correct information. Another possibility is that your furnace’s air filter is dirty or clogged.

While there are sometimes simple and straightforward solutions to these types of common furnace problems, it’s best to call in a professional to have them take a look if you’re not sure where to start searching for a problem. In most cases you’ll need them to come out and make the necessary repairs anyway.

What Is a Downflow vs. an Upflow Furnace?

Wednesday, October 12th, 2011

When you go looking to buy a furnace in Clackamas, you may well be surprised by how many different elements go into making a good purchasing decision. There are simply so many different kinds of furnaces available now and they each are more appropriate for certain situations. That means that finding the one that’s right for you is less about finding the one best unit than it is about finding the one that is the best match for your particular circumstances.

This applies to the type of fuel the furnace uses, its energy efficiency, and whether it’s an upflow furnace or a downflow furnace. Energy efficiency and fuel types are probably things that you’re more or less familiar with. But what are we talking about when we classify a furnace as an upflow or downflow model?

Well, it’s pretty much what it sounds like. These terms refer to the direction the air flows as it is taken in and heated by the furnace. So in an upflow furnace, the cool air is taken in at the bottom, warmed, and then expelled at the top. A downflow furnace, on the other hand, takes in cool air at the top and expels heated air at the bottom.

While this is all very exciting, it may still not be obvious what impact this will have on your decision about what type of furnace to buy. The main thing you’ll have to think about when you’re deciding between an upflow and a downflow furnace is where the furnace will be placed in your house.

An upflow furnace is generally installed in the basement so that the heated air is directed towards the parts of the house you want cooled and so that the furnace can be appropriately vented outside of the house. On the other hand, a downflow furnace would be installed in your attic for the same reasons.

So where you want to have the furnace installed is probably the biggest thing to take into account as you’re comparing these two types of equipment. Of course, whether you pick an upflow or a downflow furnace, you’ll still have to select the appropriate AFUE, size and fuel source to best meet your needs. But making the choice between upflow and downflow can at least make it easier to narrow down your options.

Furnaces vs. Heat Pumps

Monday, October 10th, 2011

If you’re preparing to replace your existing heating system in Cornelius, you may very well be struggling with the question of whether to go with a furnace or a heat pump for all of your future home heating needs. Each of these systems have their own advantages and drawbacks, and once you’ve narrowed it down to one type or the other, you’ll still have a pretty wide variety of products to choose from.

Furnaces are still the most popular type of home heating equipment on the market. You can get furnaces that run on gas, oil or electricity, although gas furnaces are by far the most common type of furnace around these days. The latest models are extremely energy efficient, with AFUE ratings reaching into the high 90%s.

Like heat pumps, furnaces use ducts to transfer heated air throughout your home. They typically require regular maintenance once every year or two depending on the type of furnace you have, and they can be expected to last anywhere from 15 to 25 years when properly maintained. Most modern furnaces are also made to be compatible with a central air conditioning or cooling system as well.

Heat pumps, on the other hand, don’t generate the heat that they circulate throughout your house. Instead they are able to extract the heat from the air outside and pump it inside. This means that they use much less energy than even the most energy efficient furnaces.

However, heat pumps are only capable of heating your house comfortably when the outside temperature is above freezing. If you live in an area with particularly long and frigid winters, you’ll probably find that you need to supplement your heat pump with another heat source. Because of this, it actually makes little sense to use a heat pump in more extreme climates.

On the other hand, if you live in an area with relatively mild winters, heat pumps can be a great option. They provide a constant flow of warm air to all parts of your home and can also keep you house cool during hot summer months. To cool your home, heat pumps simply reverse the process they use to warm it. They take the heat out of your indoor air and pump it outside. This is a very effective home cooling method and makes heat pumps a great solution for year round comfort.